On site installation

by / Tuesday, 03 September 2013 / Published in You Do
Bookmark and Share

On site installation

  • Remove all knock out panels.
  • Remove all packed items, all parts of the module assembly.
  • Prepare all interior joining wall surfaces with initial expansion sealant.
  • Lift modules into place, onto foundations.
  • Complete connection of modules to foundation and apply backer rods and roofing sealant into all opening cracks between modules.
  • Place secondary peel and stick strip along sealed joints on roof.
  • Install all roof angle pieces in numerical order as per markings on MEKA building, and spot weld in place.
  • Apply all cladding panels by hanging from the roof pan that has just been welded in place.
  • Install all interior mill work and connecting panels, and complete all interior connections.
  • Finish all site grading, decking and coordinate hookups with Third Party Providers.
  • Install roofing Advice
Bookmark and Share

Leave a Reply


TOP